Nickel & Special Alloys (Percentage Items)

The standard nickel-chromium alloy: resists oxidation up to about 1,100 °C, chloride stress-corrosion cracking and caustic environments.

An aluminium-bearing version of 600 with outstanding resistance to oxidation and scaling up to about 1,200 °C.

A nickel-chromium-cobalt-molybdenum alloy with exceptional strength and oxidation resistance above 980 °C.

The most widely used high-performance nickel alloy: very high strength plus excellent resistance to sea water, pitting and crevice corrosion.

A precipitation-hardenable nickel alloy with very high strength from −250 °C to about 700 °C, and good weldability.

A nickel-iron-chromium alloy that stays strong and resists oxidation and carburisation at high temperatures.

Controlled-carbon versions of Incoloy 800 with much higher creep and rupture strength above 600 °C.

A nickel-iron-chromium alloy with molybdenum and copper, built for sulphuric and phosphoric acid and sour oil-and-gas service.

A nickel-copper alloy with excellent resistance to sea water, brine, hydrofluoric acid and alkalis.

An age-hardenable version of Monel 400: the same corrosion resistance, with about three times the strength.

One of the most versatile corrosion-resistant alloys, handling oxidising and reducing chemicals, wet chlorine and chlorides.

A nickel-chromium-molybdenum-tungsten alloy with better resistance than C-276 to oxidising acids and localised pitting.

Commercially pure wrought nickel with excellent resistance to caustic soda and good thermal and electrical conductivity.

The low-carbon version of Nickel 200, safe for service above 315 °C without embrittlement.

A nickel-iron-chromium alloy developed for sulphuric acid, with good resistance to chloride stress-corrosion cracking.

A 6% molybdenum super-austenitic stainless steel with excellent resistance to pitting in sea water and chloride solutions.

A super duplex stainless steel with very high strength and excellent resistance to chloride pitting and stress-corrosion cracking.