Monel K-500 Supplier in Vadodara
An age-hardenable version of Monel 400: the same corrosion resistance, with about three times the strength. Sheet, plate, bar, pipe and flanges — delivered all over India.
Monel K-500 (Alloy K-500)
An age-hardenable version of Monel 400: the same corrosion resistance, with about three times the strength. We supply Monel K-500 as sheet, plate, coil / strip, round bar, pipe, tube, flanges, wire, with mill test certificates, from our stock point at GIDC Makarpura, Vadodara.
Chemical composition (%)
| Ni (+Co) | Cu | Al | Ti | Fe | Mn | C |
|---|---|---|---|---|---|---|
| 63.0 min | 27.0 – 33.0 | 2.30 – 3.15 | 0.35 – 0.85 | 2.0 max | 1.5 max | 0.25 max |
Mechanical properties
| Tensile strength (min) | 965 MPa |
|---|---|
| Yield strength 0.2% (min) | 690 MPa |
| Elongation (min) | 20% |
| Condition | Hot-finished + age-hardened bar (ASTM B865) |
| Density | 8.44 g/cm³ |
Equivalent grades
| Trade name | Generic | UNS | Werkstoff Nr. | DIN |
|---|---|---|---|---|
| Monel K-500 | Alloy K-500 | N05500 | 2.4375 | NiCu30Al |
Specifications by product form
| Monel K-500 bar / rod | ASTM B865 |
|---|---|
| Monel K-500 sheet / plate | Supplied to order |
Applications of Monel K-500
- Pump and propeller shafts
- Oil-well drill collars and tools
- Springs and fasteners for marine use
- Valve trim
- Doctor blades and scrapers
Our advice
K-500 is used where Monel 400 isn't strong enough. Specify the condition (annealed or age-hardened).
Typical specification values for guidance only — always refer to the mill test certificate. Trade names are trademarks of their owners.
Monel K-500 — FAQs
Where can I buy Monel K-500 in Vadodara?
Sagar Sales Corporation (Steel Mall®), GIDC Makarpura, Vadodara, supplies Monel K-500 sheet, plate, round bar, pipe and flanges with mill test certificates, and delivers all over India. Call +91 70162 29319 or send your size on WhatsApp for today's price.
What is the chemical composition of Monel K-500?
Monel K-500 (UNS N05500) typically contains Ni (+Co) 63.0 min%, Cu 27.0 – 33.0%, Al 2.30 – 3.15%, Ti 0.35 – 0.85%, Fe 2.0 max%, Mn 1.5 max%, C 0.25 max%.
What is the equivalent of Monel K-500?
Monel K-500 is also known as Alloy K-500. Its designations are UNS N05500, Werkstoff Nr. 2.4375 and DIN NiCu30Al.
What is the density of Monel K-500?
The density of Monel K-500 is about 8.44 g/cm³ (8440 kg/m³). A 1 × 2 m sheet, 1 mm thick, weighs about 16.9 kg.
What is the price of Monel K-500 per kg?
Monel K-500 is priced per kg and depends on the form (sheet, bar or pipe), size, quantity and the nickel market on the day. Send us your size and quantity for a same-day quote.
Get today's Monel K-500 rate
Tell us the grade, size, finish and quantity. We check stock and send a per-kg rate with dispatch date — usually the same working day.
- Rates direct from Vadodara stock
- Mill test certificate with every lot
- Cut-to-size and delivery all over India