Inconel 718 Supplier in Vadodara
A precipitation-hardenable nickel alloy with very high strength from −250 °C to about 700 °C, and good weldability. Sheet, plate, bar, pipe and flanges — delivered all over India.
Inconel 718 (Alloy 718)
A precipitation-hardenable nickel alloy with very high strength from −250 °C to about 700 °C, and good weldability. We supply Inconel 718 as sheet, plate, coil / strip, round bar, pipe, tube, flanges, wire, with mill test certificates, from our stock point at GIDC Makarpura, Vadodara.
Chemical composition (%)
| Ni | Cr | Nb+Ta | Mo | Ti | Al | Fe | C |
|---|---|---|---|---|---|---|---|
| 50.0 – 55.0 | 17.0 – 21.0 | 4.75 – 5.50 | 2.80 – 3.30 | 0.65 – 1.15 | 0.20 – 0.80 | Balance | 0.08 max |
Mechanical properties
| Tensile strength (min) | 1275 MPa |
|---|---|
| Yield strength 0.2% (min) | 1034 MPa |
| Elongation (min) | 12% |
| Condition | Solution treated + aged bar (ASTM B637 / AMS 5662-5663) |
| Density | 8.19 g/cm³ |
Equivalent grades
| Trade name | Generic | UNS | Werkstoff Nr. | DIN |
|---|---|---|---|---|
| Inconel 718 | Alloy 718 | N07718 | 2.4668 | NiCr19NbMo |
Specifications by product form
| Inconel 718 sheet / plate | ASTM B670, AMS 5596 |
|---|---|
| Inconel 718 bar | ASTM B637, AMS 5662, AMS 5663 |
| Inconel 718 forgings | ASTM B637 |
Applications of Inconel 718
- Aerospace engine parts
- Oil and gas valve stems and hangers
- High-strength fasteners and springs
- Cryogenic equipment
- Pump shafts
Our advice
718 gets its strength from age-hardening heat treatment. Always specify the condition you need (solution annealed or aged).
Typical specification values for guidance only — always refer to the mill test certificate. Trade names are trademarks of their owners.
Inconel 718 — FAQs
Where can I buy Inconel 718 in Vadodara?
Sagar Sales Corporation (Steel Mall®), GIDC Makarpura, Vadodara, supplies Inconel 718 sheet, plate, round bar, pipe and flanges with mill test certificates, and delivers all over India. Call +91 70162 29319 or send your size on WhatsApp for today's price.
What is the chemical composition of Inconel 718?
Inconel 718 (UNS N07718) typically contains Ni 50.0 – 55.0%, Cr 17.0 – 21.0%, Nb+Ta 4.75 – 5.50%, Mo 2.80 – 3.30%, Ti 0.65 – 1.15%, Al 0.20 – 0.80%, Fe Balance%, C 0.08 max%.
What is the equivalent of Inconel 718?
Inconel 718 is also known as Alloy 718. Its designations are UNS N07718, Werkstoff Nr. 2.4668 and DIN NiCr19NbMo.
What is the density of Inconel 718?
The density of Inconel 718 is about 8.19 g/cm³ (8190 kg/m³). A 1 × 2 m sheet, 1 mm thick, weighs about 16.4 kg.
What is the price of Inconel 718 per kg?
Inconel 718 is priced per kg and depends on the form (sheet, bar or pipe), size, quantity and the nickel market on the day. Send us your size and quantity for a same-day quote.
Get today's Inconel 718 rate
Tell us the grade, size, finish and quantity. We check stock and send a per-kg rate with dispatch date — usually the same working day.
- Rates direct from Vadodara stock
- Mill test certificate with every lot
- Cut-to-size and delivery all over India