SS 316L Stainless Steel
Low-carbon 316 — the standard grade for pharma, biotech and welded chemical equipment.
Chemical composition of SS 316L (%)
| C | Mn | Si | P | S | Cr | Ni | Mo | N |
|---|---|---|---|---|---|---|---|---|
| 0.030 max | 2.00 max | 0.75 max | 0.045 max | 0.030 max | 16.0 – 18.0 | 10.0 – 14.0 | 2.00 – 3.00 | 0.10 max |
Mechanical properties
| Tensile strength (min) | 485 MPa |
|---|---|
| Yield strength 0.2% (min) | 170 MPa |
| Elongation (min) | 40% |
| Hardness (max) | 95 HRB / 217 HB max |
| Density | 7.98 g/cm³ |
Equivalent grades
| ASTM / AISI | UNS | EN / W.Nr. | DIN | JIS |
|---|---|---|---|---|
| 316L | S31603 | 1.4404 | X2CrNiMo17-12-2 | SUS 316L |
Applications of SS 316L
- Pharma reactors and vessels
- Cleanroom panels
- Bioprocess piping
- Welded chemical tanks
- Offshore and marine fabrication
Our advice
Like 304/304L, most mills supply dual-certified 316/316L. Ask for it if your drawing calls for either grade.
Values are typical ASTM A240 limits for flat products and are for guidance only. Always refer to the mill test certificate supplied with the material.
SS 316L — FAQs
What is the chemical composition of SS 316L?
SS 316L contains C 0.030 max%, Mn 2.00 max%, Si 0.75 max%, P 0.045 max%, S 0.030 max%, Cr 16.0 – 18.0%, Ni 10.0 – 14.0%, Mo 2.00 – 3.00%, N 0.10 max% (typical ASTM A240 limits).
What is the equivalent of SS 316L?
SS 316L is UNS S31603, EN 1.4404 (X2CrNiMo17-12-2) and SUS 316L in the Japanese standard.
What is the density of SS 316L?
The density of SS 316L is about 7.98 g/cm³ (7980 kg/m³).
Where can I buy SS 316L in Vadodara?
Sagar Sales Corporation supplies SS 316L sheet, plate, coil, round bar, pipe, tube, angle & flat, flanges in Vadodara with mill test certificates. Contact us for today's rate.
Get today's SS 316L rate
Tell us the grade, size, finish and quantity. We check stock and send a per-kg rate with dispatch date — usually the same working day.
- Rates direct from Vadodara stock
- Mill test certificate with every lot
- Cut-to-size and delivery all over India