SS 202 Stainless Steel
A lower-nickel, manganese-bearing grade that costs less than 304. Good for indoor and decorative use.
Chemical composition of SS 202 (%)
| C | Mn | Si | P | S | Cr | Ni | N |
|---|---|---|---|---|---|---|---|
| 0.15 max | 7.5 – 10.0 | 1.00 max | 0.060 max | 0.030 max | 17.0 – 19.0 | 4.0 – 6.0 | 0.25 max |
Mechanical properties
| Tensile strength (min) | 620 MPa |
|---|---|
| Yield strength 0.2% (min) | 260 MPa |
| Elongation (min) | 40% |
| Hardness (max) | 241 HB max |
| Density | 7.8 g/cm³ |
Equivalent grades
| ASTM / AISI | UNS | EN / W.Nr. | DIN | JIS |
|---|---|---|---|---|
| 202 | S20200 | 1.4373 | X12CrMnNiN18-9-5 | SUS 202 |
Applications of SS 202
- Railings and gates
- Furniture and fixtures
- Utensils and kitchenware
- Indoor decorative panels
- Automotive trims
Our advice
202 is cheaper but less corrosion-resistant than 304. Avoid it for outdoor coastal areas, chemicals and food-processing contact.
Values are typical ASTM A240 limits for flat products and are for guidance only. Always refer to the mill test certificate supplied with the material.
SS 202 — FAQs
What is the chemical composition of SS 202?
SS 202 contains C 0.15 max%, Mn 7.5 – 10.0%, Si 1.00 max%, P 0.060 max%, S 0.030 max%, Cr 17.0 – 19.0%, Ni 4.0 – 6.0%, N 0.25 max% (typical ASTM A240 limits).
What is the equivalent of SS 202?
SS 202 is UNS S20200, EN 1.4373 (X12CrMnNiN18-9-5) and SUS 202 in the Japanese standard.
What is the density of SS 202?
The density of SS 202 is about 7.8 g/cm³ (7800 kg/m³).
Where can I buy SS 202 in Vadodara?
Sagar Sales Corporation supplies SS 202 sheet, coil, perforated sheet, round bar, pipe, tube, angle & flat in Vadodara with mill test certificates. Contact us for today's rate.
Get today's SS 202 rate
Tell us the grade, size, finish and quantity. We check stock and send a per-kg rate with dispatch date — usually the same working day.
- Rates direct from Vadodara stock
- Mill test certificate with every lot
- Cut-to-size and delivery all over India